模具介紹：

道路防撞墻模具介紹主要是用來生產我們的公路兩邊用來保護我們整個道路的防撞墻的生產工具，一般采用的是兩塊鋼板通過對拉螺栓進行固定的生產方式。使用對拉螺栓的制作費用還比價低。對拉螺栓自成一套零件，存放時可以安裝好一起進行存放，不容易丟失。MOULD DESCRIPTION: Road Crash Wall mould description is mainly used to produce our road on both sides of the crash wall used to protect our entire road production tools, it’s usually made of two steel plates held together by mode of production bolts. The production cost of using pull bolts is lower than the price. The pull bolt is a set of parts, when stored can be installed together for storage, not easy to lose.

模具性能：

道路防撞墻鋼模具加工制作比較簡單，并且組裝起來比較簡便，拆模比較容易，不會損壞鋼模板，還能有效的延長道路防撞墻模具的使用壽命，讓混凝土構件的整體形狀更為美觀。使用道路防撞墻模具進行生產之后，我們需要通過自然養護的生產方式來對混凝土制塊進行養護。

Mould performance: The manufacture of the Steel Mould for the road anti-collision wall is relatively simple, and the assembly is relatively simple, the demoulding is relatively easy, the steel mould will not be damaged, and the service life of the mould for the road anti-collision wall can be effectively extended, to make the overall shape of the concrete members more beautiful. After using road crash wall molds, we need to use natural curing mode of production to maintain the concrete blocks

使用說明：

道路防撞墻模具一般在工程中對生產出來的混凝土制塊的澆水養護工程的時間不能低于一周，澆水的次數應該是貫穿整個混凝土的養護期的，混凝土的表面應該一直處于濕潤狀態。氣候比較干燥的情況下，可以適當?shù)募哟蠹铀螖?shù)。如果施工現場不能夠進行澆水的話，我們建議施工方在使用該模具來進行生產工作的時候，完成混凝土漿料的澆筑工作之后，還需要注意其整體的質量，從而其整體的生產情況。

Directions: In general, the time of pouring and curing the produced concrete blocks can not be less than one week, and the Times of pouring should be throughout the curing period of the concrete, the surface of the concrete should always be wet. The climate is drier case, can increase appropriately add water frequency. If the construction site can not be used for watering, we suggest that the construction side in the use of the mold to carry out the production work, after the completion of concrete slurry pouring work, but also need to pay attention to its overall quality, so that the overall production situation.