檢查井模具的尺寸是以模具總結為主，不論各地區使用何種樣式的混凝土檢查井，都在一一編錄的以下內容里面，主要差異是以圓形與方形，直徑、高度、壁厚等幾方面。

常見圓形檢查井模具的尺寸主要分為井筒和井體兩部分，首先是井筒的尺寸一般是600、700、800毫米三種，壁厚不固定，按照8、10、12、15、20厘米為主，根據實際生產要求而定。常見井體模具的尺寸為1000、1200、1250、1500毫米，壁厚分為10、15、20厘米三種。

常見方形檢查井模具的尺寸主要為1000*1000、1360*1360、1500*1800、1100*1500毫米等，方形井的尺寸沒有圓形井固定，因?yàn)樯婕暗降念I(lǐng)域非常多。The dimensions of manhole molds are mainly based on the summary of molds. No matter what style of concrete manhole is used in various regions, they are recorded one by one in the following contents. The main differences are round and square, and the diameter

, height, wall thickness, etc.

The dimensions of common circular inspection well molds are mainly divided into shaft and well body. First, the dimensions of shaft are generally 600, 700 and 800 mm. The wall thickness is not fixed. It is mainly 8, 10, 12, 15 and 20 cm

According to the actual production requirements. The dimensions of common well body molds are 1000, 1200, 1250 and 1500 mm, and the wall thickness is divided into 10, 15 and 20 cm.

The dimensions of common square manhole molds are mainly 1000 * 1000, 1360 * 1360, 1500 * 1800, 1100 * 1500mm, etc. the dimensions of square wells ar