混凝土隔離帶模具-隔離帶模具-使用與說明是模具在生產混凝土預制件的時候需要注意哪些問題，模具在使用的時候需要注意不要損壞到模具的鋼板，也需要注意避免生產出來的混凝土預制件的使用時間縮短。
The use and description of the concrete isolation belt mold - isolation belt mold - are the problems that the mold needs to pay attention to when producing concrete precast parts. When the mold is used, it needs to pay attention not to damage the steel plate of the mold, but also to avoid shortening the service time of the produced concrete precast parts.
需要在操作模具的時候把模具中的混凝土中產生的氣泡全部震動出來，這樣生產出來的混凝土預制件就可以延長一些了，混凝土隔離帶模具生產混凝土預制件的過程非常的簡單，制作混凝土預制件的時候整個制作流程中一定要避免模具出現潮濕的現象，一旦發現模具受潮的話，及時的聯系模具制作工廠的銷售人員重新的制作模具It is necessary to vibrate all the bubbles generated in the concrete in the mold when operating the mold, so that the produced concrete prefabricated parts can be extended. The process of producing concrete prefabricated parts with concrete isolation belt mold is very simple. When making concrete prefabricated parts, the whole manufacturing process must avoid the phenomenon of moisture in the mold, Once the mold is found to be damp, timely contact the sales staff of the mold making factory to make the mold again
模具從生產到模具使用完成只要注意避免模具損壞的現象出現，使用完之后使用清洗模具的工具們把模具清洗干凈就可以了，模具從生產到模具的使用完成經過的時間很少，使用完模具之后需要把模具擱置到一個干凈、干燥的庫房中，這樣混凝土隔離帶模具的使用次數就會延長了，把模具適量的進行疊放，不要把模具疊放的過高，讓模具的使用時間縮短很多，模具需要把每個階段的具體情況記錄好。
From the production of the mold to the completion of the use of the mold, as long as attention is paid to avoid the damage of the mold. After the use, the tools for cleaning the mold can be used to clean the mold. The time from the production to the completion of the use of the mold is very little. After the use of the mold, the mold needs to be placed in a clean and dry warehouse, In this way, the use times of concrete isolation belt molds will be prolonged. Stack the molds appropriately. Do not stack the molds too high, which will shorten the service time of the molds. The molds need to record the specific conditions of each stage.