AAMA 612 建筑用鋁陽極氧化與透明有機復合涂層的推薦規范、性能要求和測試方法—測試標準
AAMA 612 Voluntary Specification, Performance Repuirements, and Test Procedures for Combined Coatings of Anodic Oxide and Transparent Organic Coating on Architectural Aluminum
AAMA 612 建筑用鋁陽極氧化與透明有機復合涂層的推薦規范、性能要求和測試方法
AAMA 612 建筑用鋁陽極氧化與透明有機復合涂層的推薦規范、性能要求和測試方法—測試范圍
This specification describes test procedures and performance requirements for architectural quality combined coatings of anodic oxide and transparent organic coatings (hereafter referred to as the "combined coatings"), applied to aluminum extrusions and panels for architectural products. The primary units of measure in this document are metric. The values stated in SI units are to be regarded as the standard. The IP values given in parentheses are for reference only. This document was developed in an open and consensus process and is maintained by representative members of AAMA as advisory information.
本規范描述了用于建筑產品鋁型材和面板的陽極氧化物和透明有機涂料的建筑質量復合涂料(以下簡稱“復合涂料”)的測試程序和性能要求。本文件中主要的度量單位是公制。以SI單位表示的值被視為標準。括號內的IP值僅供參考。該文件是在公開和協商一致的過程中制定的，并由美國醫學協會的代表成員作為咨詢信息加以維護。
AAMA 612 建筑用鋁陽極氧化與透明有機復合涂層的推薦規范、性能要求和測試方法—檢測項目及方法
AAMA 612 Section 7.1 ASTM B244復合涂層厚度 Combined coating thickness
AAMA 612 Section 7.2 ASTM B137氧化層重量和表觀密度 Oxide coating weight and apparent density
AAMA 612 Section 7.3 AATCC 173色彩均勻性 Color uniformity
AAMA 612 Section 7.4 ASTM D523 60℃鏡面光澤度 Gloss uniformity at 60℃
AAMA 612 Section 7.5 ASTM D3363有機涂層硬度 Organic coating hardness
AAMA 612 Section 7.6.1.1涂層干式附著力 Film dry adhesion
AAMA 612 Section 7.6.1.2涂層濕式附著力 Film wet adhesion(24h浸水,38°C)
AAMA 612 Section 7.6.1.3涂層沸水煮附著力 Film boiling water adhesion(20 mins, 99~100°C)
AAMA 612 Section 7.7耐沖擊測試 Impact resistance
AAMA 612 Section 7.8 ASTM D968耐落沙磨耗 Abrasion resistance
AAMA 612 Section 7.9.1耐鹽酸 Muriatic acid resistance
AAMA 612 Section 7.9.2耐泥漿 Mortar resistance
AAMA 612 Section 7.9.3 ASTM D2244 耐硝酸 Nitric acid resistance
AAMA 612 Section 7.9.4耐清潔劑 Detergent resistance
AAMA 612 Section 7.9.5耐窗戶清洗劑 Window cleaner resistance
AAMA 612 Section 7.10.1 ASTM D2247 or ASTM D4585耐濕 Humidity resistance (4000h, RH,38°C)
AAMA 612 Section 7.10.2 ASTM B117 耐鹽霧 Salt spray resiatance(4000h)
AAMA 612 Section 7.11裂紋測試 Craze resistant
AAMA 612 Section 7.12耐候測試 Weathering (南佛羅里達州,北緯27度,45度角面向南方,5年曝曬)
AAMA 612 Section 7.12.1.2 ASTM D2244 Section 6.3顏色保持力 Color retention
AAMA 612 Section 7.12.1.3 ASTM D4214耐粉化性 Chalk resistance
AAMA 612 Section 7.12.1.4 ASTM D523光澤度保持力 Gloss retention
AAMA 612 Section 7.12.1.5 ASTM B244耐侵蝕 Resistance to erosion