Tulsion? 特種除油樹脂
ISO-9001/ISO-14001/OHSAS-18000
Tulsion?
除油樹脂 是一款具有便于有機萃取劑（P507/P204等）去除的控制孔徑的，專門開發的陰離子交換樹脂。
Tulsion?
除油樹脂 也專門應用于去除COD以及其他有機物等。
Tulsion?
除油樹脂由于其本身的專屬特性而顯示出了優越的物理特性和化學穩定性，適合于在廣泛的PH范圍內和溫度條件下使用。
典型特性（TYPICAL CHARACTERISTICS）：Tulsion 除油樹脂
型式/Type 陰離子交換樹脂
主體結構/Matrix structure 聚苯乙烯共聚物/Polystyrene copolymer
物理型式/Physical form 含水球狀/Moist spherical beads
官能基/Functional group I型季胺官能基/Quaternary Ammonium Type I
總交換樹脂( meq/ml ) 1.0 meq/ml
目數/Screen size USS (濕) 16 to 50
粒度/Particle size(95% minm.) 0.3 - 1.2 mm
濕度/Moisture content 67±3%
PH 范圍/pH range 0 - 14
溫度/Maximum Temperature Stability 80℃（175℉）
溶解性/Solubility 不溶于任何容積
反沖洗濃度比/Backwash settled density 700 - 750 g/l
膨脹系數/Swelling(approx.) Cl- 到 OH- 20%
操作條件特性
操作溫度/Maximum operating temperature 175℉ (80℃)
樹脂床小高度/Resin bed depth minm. 600 mm
流速/Maximum service flow 60m3/hr/m3
逆洗膨脹空間/Backwash expansion space 50 - 70%
逆洗膨脹流速/Backwash expansion flow rate (25℃) 2-4gpm/ft3 (5-10m3/hr/m3)
再生劑/Regenerant NaOH
再生劑用量/Regeneration level 40-160g NaOH /L
再生劑濃度/Regenerant concentration 4%-8% NaOH
再生時間/Regeneration time 15-60 mins
沖洗流速/Rinse flow rate : slow 再生流速
Fast 工作流速
沖洗量/Rinse volume 4-10 m3/ m3
游離氯/Free chlorine 無
濁度/ Turbidity < 2 NTU
鐵和重金屬/Iron and heavy metals < 0.1 ppm
測試（TESTING）：
Tulsion 除油樹脂
離子交換樹脂的抽樣和測試是按標準的測試程序，即ASTMD - 2187和IS - 7330，1998.
包裝（PACKING）：
Tulsion 除油樹脂
Super Sack 1000 lit
Super Sack 35 cft
MS drums 180 lit.
MS drums 7 cft
HDPE lines Bags 25 lit.
HDPE lines Bags 1 cft
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance