宏旭預制階梯式生態護坡模具 階梯式生態護坡模具

在預制階梯式生態護坡模具，有一點比較重要的是初次接觸此類生產護坡模具的時候，往往在具體操作上會存在很多疑點，尤其是模具的脫模問題，因為該模具與其他鋼模具不同的是內部呈現空心構造，所以如何保證將完整的預制階梯式生態護坡模具脫模不來，而混凝土預制塊不會發生損害，是廠家對于預制廠或者生產此類預制塊的施工單位責任體現。那么如果在預制階梯式生態護坡模具使用程序里面，脫模一項是如何操作的呢？按照廠家實際提供的可靠性參考經驗，往往在混凝土凝固以后，先是將兩側的模板打開(模具四周都是可以打開的)，然后將模具倒過來后，拆掉另外一塊主板（仿石花紋的這塊不能動），然后將內模吊裝出來后將仿石花紋這塊拆掉，這樣就形成了完成的階梯式護坡磚。這種拆模仿石也摒棄了過去直接將預制塊吊裝出來的方式，更加完整的保留預制塊與圖紙的相同，從而在表面效果以及使用安裝效果上都達到非常好的一個狀態。In the prefabrication of the ladder type ecological slope protection mould, it is more important that there are many doubts in the specific operation, especially the demoulding problem of the mould, because the mould is different from other steel moulds in that the internal structure is hollow, so how to ensure that the complete prefabricated ladder type ecological slope protection mould can not be demoulded The concrete precast block will not be damaged, which is the responsibility of the manufacturer for the precast plant or the construction unit that produces such precast block. So how to operate demoulding in the application procedure of prefabricated ladder type ecological slope protection mould? According to the actual reliability reference experience provided by the manufacturer, after the concrete is solidified, the formworks on both sides are usually opened (all around the mold can be opened), then the mold is reversed, and another main board is removed (the stone like pattern cannot move), and then the internal mold is hoisted out, and the stone like pattern is removed, thus forming a finished stepped slope protection Bricks. This kind of demoulding imitation stone also abandons the way of directly lifting the precast block out in the past, and more completely retains the same precast block as the drawing, so as to achieve a very good state in the surface effect and the use and installation effect.