HKW9700-D-E系列熱保護器
HKW9700-D-E型熱保護器具有體積小、外殼絕緣、動作靈敏、壽命長等特點，
適用于新能源電池，電機、電源，光燈鎮流器、變壓器、汽車馬達、集成電路及
一般電氣設備的過熱過流雙重保護作用。
HKW9700-F-H thermal protector has small dimension; insulation shell;
sensitive and long life time. Its widely use in new energy battery;
motor; power; ballast; transformer;integrated circuit and
electrical equipment’s overheat and overload double protection.
2結構特點Structural features
HKW9700-D-E系列熱保護器是采用一定幾何形狀的雙金屬片，無需輔助機構，僅靠雙金屬片的自身感溫和電流熱效應，使雙金屬元件的狀態發生快速變化，直接帶動觸點實現自動切斷和接通電路，起到過熱、過載保護作用。
HKW9700-F-G thermal protector use unique bimetal and don’t need more auxiliary parts. Using bimetal Self-sensing temperature and Current thermal effect to change the bimetal’s shape to control the electric circuit cut off or contact on. Overheat and overload double protection.
3安規認證 (certification)：CQC18002202372 CQC180022022369
UL E502318
KC ZU02105-19001
TUV B1039300001
ROHS AGC01409190101101-001 REACH AGC01409190101101-003
4產品外形dimension
Plastic shell塑殼：15*7*3.5MM; 鐵殼：15*6.5*3.1
Contact type動作分為：常開/常閉 Normal closed or normal opened
熱保護器的外殼 可以配安裝支架。Optional mounting bracket
5產品性能performance
5.1額定電流rated power(COS∮=0.7)
DC 12V-8A 24V-4A、AC 250V-5A 125V 7A
5.2斷開溫度action temp：30℃～150℃; 復位溫度reset temp 20℃～110℃。
5.3抗拉力試驗:產品的引線端應能承受大于或等于20N拉力,導線無斷裂、滑出。
Tensile test:≥20N，No breaks or slips out of the wire
5.4絕緣電壓:Insulation voltage
a.產品在斷開時的引線之間應能承受AC660V,歷時1min而無擊穿閃絡現象;
In the power off state the insulation voltage between two wires should accept AC660V one minute withoutbreakdown and flashover.
b.產品引線與絕緣外殼之間能承受AC1800V,歷時1S而無擊穿閃絡現象;
The insulation voltage between the wires and shell should accept AC1800V 1 second withoutbreakdown and flashover.
5.5絕緣電阻:在正常條件下,引線與絕緣外殼之間的絕緣電阻在100MΩ以上。
Insulation resistance:≥100MΩ
5.6接觸電阻:產品的接觸電阻應不大于50mΩ。
Contact resistance：≤50mΩ
5.7耐高溫試驗:產品置于額定動作溫度50℃的空氣環境中保持96h。
High temperature test：The product is kept in an air environment over 50°C for 96 h
5.8耐低溫試驗:產品置于-40℃空氣環境中保持96h。
Low temperature test：The product is kept in an air environment of -40°C for 96 h
5.9抗振試驗: 熱保護器應能承受振幅1.5mm,頻率變化10～55Hz，掃描變化周期3～5次/min，
振動方向X、Y、Z，每個方向各連續振動2h。
Anti-vibration test：The thermal protector should be able to withstand an amplitude of 1.5mm, a frequency change of 10 to 55Hz, and a scan change period of 3 to 5 times/min.
The vibration directions X, Y, and Z are continuously vibrated for 2 h in each direction.
5.10跌落試驗:產品自0.7m高度自由落下1次。
Drop test：The product is free to fall