1.基本信息Basic Information
1.1執(zhí)行標準 According to (Standard)
GB/T14536.1-2008:《家用和類似用途電自動控制器 第1部分：通用要求》
IEC 730-1:1994 Automatic electrols for household and similar use. Part 1:General requirements
GB/T14536.10-2008:《家用和類似用途電自動控制器 溫度敏感控制器的特殊要求》
IEC 730-2-9-1992:Automatic electrical controls for household and similar use Particuar
requirements for temperature sensing controls
JB/T 3751-1997:《家用和類似用途雙金屬溫度控制器》
JB/T 3751-1997:Bi-meral temperature controls for household and similar use
1.2構造Structure
1.2.1. 分類 Classification
屬于溫度固定的雙金屬碟片瞬動式溫度控制器。
They are temperature-fixed bi-metal Snap-Action temperature controller
1.2.2.接地方式 Method Of Earth
通過溫控器金屬外蓋與設備接地金屬部件相連。
By means of the metal cup of thermostat connected in the earthing meral part.
1.2.3.外觀及尺寸Appearance
外觀應加工良好，無有損于性能及商品價值的傷、裂、變形、毛刺、污漬等缺陷。
The appearance should be processed well, without any defect effecting the performance or
value of the merchandise such as strain,crach,rust,distortion,besmirch,ete.
1.3動作方式Action Forms
■ 室溫下觸點接通（nc），溫度上升觸點斷開，溫度降低觸點恢復接通。
Normal close:Cut out at temperature rise,cut in at temperature decreasing.
□室溫下觸點接通（nc），溫度下降觸點斷開，溫度上升觸點恢復接通。
Normal close:Cut out at temperature decreasing,cut in at temperature rise.
□室溫下觸點斷開（no），溫度上升觸點接通，溫度降低觸點恢復斷開。
Normal open:Cut in at temperature rise,cut out at temperature decreasing.
□室溫下觸點斷開（no）, 溫度下降觸點接通，溫度上升觸點恢復斷開。
Normal open:Cut in at temperature decreasing,cut out at temperature rise.
□室溫下觸點接通（nc），溫度上升觸點斷開，溫度降低手動復位接通。
Normal close:Cut out at temperature rise,manual reset at temperature decreasing.
1.4.型號命名方式Nomenclature of Type
TM 22130 A 5 20 10A 1 R 4 D
Ⅰ Ⅱ Ⅲ Ⅳ Ⅴ Ⅵ Ⅶ Ⅷ Ⅸ Ⅹ Ⅺ
Ⅰ.工廠品牌（TM縮寫）Factoy Brand(TM Abbreviation)
Ⅱ.工廠設計代號:(本廠為22等)Design Code:22
Ⅲ.動作溫度:OFF及ON溫度中的較高值Operating tempersture,the higher value
of OFFtemp.and ON temp
Ⅳ.動作溫度特性:Temperature Characteristics
A-常閉型:斷開溫度高于接通溫度
A-Normal type:OFF temperature higher than ON temperature
K-常開型:斷開溫度低于接通溫度
K-K type:ON temperature higher htan OFF temperature
M-手動復位型：溫控器在常溫下接通，斷開后，不能自動復位，需要手動進行復位
M-Manual reset type:The thermostat switche