Bombardiers 248-PLA-0010 DIN5510新毒性測試-測試簡介

DIN 5510-2 : 2009 Annex C and annex D, test method according to ISO 5659-2 - Toxicity of smoke by FTIR technique.

In addition to the above test, smoke analysis (requested by Bombardiers 248-PLA-0010):

DIN 5510-2 附錄C和附錄D，采用ISO5659-2標準，用FTIR傅氏轉換紅外線光譜分析儀方法分析煙霧毒性。

Bombardiers 248-PLA-0010 DIN5510新毒性測試-參考標準

DIN 5510-2: 火車材料和部件燃燒性能和并發現象，分類，要求和測試方法

DIN 5510-2 : 2009 Annex C and annex D DIN 5510-2標準附錄C 和附錄D

ISO 5659-2: 塑料－生煙性測定－第2部分：單煙箱光密度測定

Bombardiers 248-PLA-0010 DIN5510新毒性測試-樣品要求

75mm*75mm*Thickness less than 25mm

Bombardiers 248-PLA-0010 DIN5510新毒性測試-測試方法

DIN 5510-2 : Preventive fire protection in railway vehicles; Part 2: Fire behaviour and fire side effects of materials and parts, classification, requirement and test methods / DIN 5510-2: 火車材料和部件燃燒性能和并發現象，分類，要求和測試方法

除了以上測試，煙密度分析采用Bombardiers 248-PLA-0010龐巴迪標準。

- Isocyanate

2,2-MDI

2,4-MDI

4,4-MDI

2,4-TDI

2,6-TDI

- Phosgen

- Ammonia,

- Acrolein

根據DIN 5510-2 附錄D標準，在測試的第4分鐘和第8分鐘采集氣體。

Measurement of the gases will be done on 4. and 8. minutes corresponding to the measurement described in DIN 5510-2 Annex D

CW 190522