方管拋光機是對方管和矩形金屬管材進行表面拋光的設備。經過拋光的方管/矩形管能夠達到鏡面效果。

Square tube polishing machine is the other side of the tube and rectangular metal pipe surface polishing equipment. The polished square tube / rectangular tube can achieve the mirror effect.

圓管拋光機的機組構成/The composition of the tube polishing machine：

拋光機組由上料架、拋光機、下料架等3部分組成。上料架負責將待拋光的管材放置好，然后向拋光機組送料。拋光機組主要是對管材進行外表面進行拋光，通過拋光輪和拋光蠟的結合，是管材表面達到鏡面效果。下料架就是負責將拋光后的管材進行集中收集，然后打包。

Polishing unit consists of loading frame, polishing machine, unloading rack and other three parts. The loading frame is responsible for placing the pipe to be polished and then feeding the polishing unit. Polishing unit is mainly on the outer surface of the pipe to be polished, through the combination of polishing wheel and polishing wax, the pipe surface to achieve mirror effect. The unloading rack is responsible for collecting the polished tubing and then packing it.

方管拋光機工作原理/Square tube polishing machine working principle：

當管材進入拋光機組后，管材由拋光機上面的牌坊予以固定，水平牌坊固定管材的上下兩個面，立牌固定管材的左右兩個面。管材在拋光機組的前進移動由水平牌坊的膠輪提供，電機將動力提供給渦輪減速機，渦輪減速機通過萬向軸將動力傳給水平軸，然后帶動管材前進。而拋光輪由電機驅動，也是按照上下、左右4個面的布局對管材進行拋光處理。

When the pipe into the polishing unit, the pipe by the polishing machine above the arch to be fixed, the horizontal arch fixed pipe up and down the two sides, legislation fixed pipe on the left and right sides. The advancement of the pipe in the polishing unit is provided by the horizontal arch of the rubber tire, the motor will be powered to the turbo reducer, the turbine reducer through the universal shaft to the power to the horizontal axis, and then drive the pipe forward. The polishing wheel is driven by the motor, but also in accordance with the upper and lower, about 4 sides of the layout of the pipe polishing.

方管拋光機參數/Square tube polishing machine parameters：